EEEEE M2–M4 Brass Standoff Kit (572pcs)
M2/M2.5/M3/M4 hex brass standoffs, screws and nuts — mounts any board on your arm.
Best for: Mounting every board
Fasteners & Hardware
Csdtylh M2–M3 Brass Standoff Kit (480pcs)
by Csdtylh
★ Best for: Pi & small-board builds
Compact M2/M2.5/M3 brass standoff assortment — covers Raspberry Pi and small boards.
Check price on Amazon
Opens Amazon in a new tab — live price & reviews there.
As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as shown on Amazon at the time of purchase.
Why we recommend it
A focused assortment in the smaller M2, M2.5 and M3 sizes that suit a Raspberry Pi, sensor breakouts and compact controller boards. Hex brass male-female standoffs with matching screws and nuts give you clean, rigid board mounting without the bulk of M4 hardware. A good companion set if your arm’s brain is a Pi or you run several small modules.
At a glance
| Quantity | 480 pieces |
|---|---|
| Sizes | M2, M2.5, M3 |
| Material | Brass (hex) |
| Best with | Raspberry Pi, small boards |
Guides that use this
Builds by platform
Raspberry Pi Robotic Arm: Add Vision, AI and a Web Interface
Build a Raspberry Pi robotic arm — when to choose a Pi over Arduino, controlling servos with a PCA9685, adding camera vision, and driving the arm from a web browser with Python.
Builds by platformArduino Robotic Arm: Build a 4-DOF Servo Arm (Wiring + Code)
Build a 4-DOF Arduino robotic arm with hobby servos. Full parts list, wiring diagram, power tips and copy-paste Arduino code to control it with potentiometers or serial commands.
Compare with
Ladinka M3 Nylon Standoff Kit (580pcs)
Non-conductive M3 nylon standoffs and screws — safe board mounting with zero short risk.
Best for: Short-safe board mounting